Monthly Archives: May 2011

FOK Machine

FOK Machine  GENERAL INFORMATION Our standart Cable Blower manufacturing designed to work with the 40 HDP pipe diameter. The connector, which can be adjusted according to  HDP pipe diameter, can be manufactured. Weight of  FOK is 45 kg, working mode. FOK is  a very compact machine with a cable-laying.

HydroFOK

HYDROFOK with Hydraulic Power Pack HydroFOK is used to blow tubes into the ducts. This machine is prepared for two different types ; 1) Seven tubes (diameter 10mm) into the ducts (diameter 50mm). 2) Four tubes (diameter 12mm) into the ducts (diameter 50mm).

CABLE CONNECTOR

GENERAL DISCRIPTION Cable Connector is using to increase the cables in duct. For example if there is one cable in duct you can increase it to two or you can increase two cables to three cables. If you do not use this tool you can not increase cables because you can not prevent air leaks […]

Cable Drum Roller

GENERAL INFORMATION Cable Drum Roller is the tool for Rolling Cable on it. You can use roller drum for different drum diameters and different widths. You can see three different drums with cable roller on figures below. You should change the placa of rear roller to use machine for different cable drums. You can cable […]

HDP Pipe Connection Device

GENERAL INFORMATION The plastic sleeves used for connecting HDP pipes are disposable. However, two-part sleeves manufactured by Cable Jet Machine can be disassembled easily after using and can be used recurrently. Our company is able to manufacture HDP pipe connection devices suitable for the HDP pipes used and your special requests as well.

Cable Unraveling

CABLE UNRAVELER Cable unraveler is used to unravel fibre optic cable coiled on a roller in the form of slack towards a certain region with machine cable unraveler removes human facter and saves your time in cable unraveling job.  The same system can be used inversely way that the cable unravelled in the form of […]